Engine oils
Industrial oils
Hydraulic oils
Coolants & antifreezes
Greases
Transmission Gear oils
Available with
High-quality lubricants certified to meet OEM cleanliness requirements.
Personal/Recreational vehicles
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.
Delo® 400 XLE SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines. 
Delo® 400 XLE SAE 15W-40
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 400 ZFA SAE 10W-30
A premium synthetic blend mixed-fleet oil for new-generation  fuel economy engines.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 XSP SAE 5W-30
A heavy duty engine oil specifically formulated for on-highway applications.
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Syn-Trans XV SAE 75W-80
A full synthetic fluid for Volvo I-Shift and Mack® mDrive™ automated manual transmissions. 
Havoline® Conventional Antifreeze/Coolant
Designed for maximum protection in both automotive and heavy-duty diesel engines. 
Havoline® Full Synthetic CVT Fluid
Havoline Full Synthetic CVT Fluid is designed for modern continuously variable transmissions (CVTs), which rely on high steel-on-steel friction between either a belt or chain and pulleys to transfer power.
Havoline® Full Synthetic Multi-Vehicle ATF
A premium quality synthetic fluid for modern 6+ speed automatic transmissions.
Havoline® Gear Oil
SAE 85W-140, 80W-90
A high-performance gear lubricant for protection over the long haul.
Havoline® Global Multi-Vehicle ATF
A premium automatic transmission fluid suited to a wide variety of domestic and imported vehicles.  
Havoline® High Mileage
SAE 0W-20, 5W-20, 5W-30, 10W-30
Synthetic blend oils to help extend engine life as mileage increases. 
Havoline® Motor Oil
5W-20, 5W-30, 10W-30
A premium automotive motor oil designed to protects against deposits and wear.
Havoline® ProDS® Euro Full Synthetic Motor Oil 5W-40
Havoline® ProDS® Full Synthetic Euro SAE 5W-40 offers superior formulating technology using select European synthetic base fluids, and its advanced additives system puts Havoline ProDS Full Synthetic Euro in a premium class of engine oils.
Havoline® ProDS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-30, 5W-40, Euro 5W-40, 5W-20, 10W-30
A full synthetic motor oil delivering non-stop protection for today's modern engines.
Havoline® Synthetic Blend Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
A blend of premium synthetic and conventional base oils for better cold temperature performance.
Havoline® Universal Antifreeze/Coolant
Designed for all makes and models of passenger cars and light trucks.
Havoline® Xtended Life Antifreeze/Coolant 
Delivers long-lasting protection for virtually all passenger cars and light trucks. 
Multifak® EP
NLGI grade: 000, 00, 0, 1, 2
Multipurpose extreme pressure greases for use in a variety of industrial applications.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Chevron Automatic Transmission Fluid MD-3
10W
Formulated for applications that call for the former DEXRON®-III H, MERCON®, and Allison C-4 fluids.
Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Gasoline fleets + Oil change service centers
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.
Delo® 400 XLE SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines. 
Delo® 400 XLE SAE 15W-40
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 400 ZFA SAE 10W-30
A premium synthetic blend mixed-fleet oil for new-generation  fuel economy engines.
Delo® Gear ESI SAE 80W-90
SAE 80W-90
Premium grade gear lubricant for severe temperature and load conditions. 
Delo® Gear ESI SAE 85W-140
SAE 85W-140
Premium grade lubricants for gearsets exposed to extremely high temperatures and loads.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® 400 XSP SAE 5W-30
A heavy duty engine oil specifically formulated for on-highway applications.
Delo® 400 XSP-FA 5W-30
Delo® 400 XSP-FA 5W-30 is a premium full synthetic fuel-economy and mixed-fleet engine oil
Delo® ELC Advanced Antifreeze/Coolant 50/50
Delo ELC Advanced products are the next generation, ethylene glycol-based NOAT (Nitrited Organic Additive Technology) products to provide excellent extended life coolant system protection in diesel, natural gas and CNG engines for both on- and off-road applications. It is available in Premixed 50/50 and concentrate.
Delo® ELI Corrosion Inhibitor
A water-based, super concentrate inhibitor that protects cooling system metals
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Syn-Gear XDA
75W-85
Delo® Syn-Gear XDA is a premium heavy duty, extreme pressure, multigrade automotive gear lubricant formulated for new generation Daimler axles found on newer model Freightliner and Western Star Trucks.
Delo® Syn-Gear XDM SAE 75W-90
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Gear XDM SAE 80W-140
SAE 80W-140
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Grease SFE EP
NLGI grade: 0
A high-performance, semi-fluid extreme pressure grease for trailer wheel-ends. 
Delo® Syn-Trans HD
SAE 50
A heavy-duty  manual transmission fluid for all-weather, year-round protection and performance.
Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions.
Delo® Syn-Trans XE SAE 75W-90
A heavy duty  synthetic manual transmission fluid for severe service operations.
Delo® Syn-Trans XV SAE 75W-80
A full synthetic fluid for Volvo I-Shift and Mack® mDrive™ automated manual transmissions. 
Havoline® Conventional Antifreeze/Coolant
Designed for maximum protection in both automotive and heavy-duty diesel engines. 
Havoline® Full Synthetic Multi-Vehicle ATF
A premium quality synthetic fluid for modern 6+ speed automatic transmissions.
Havoline® Gear Oil
SAE 85W-140, 80W-90
A high-performance gear lubricant for protection over the long haul.
Havoline® Global Multi-Vehicle ATF
A premium automatic transmission fluid suited to a wide variety of domestic and imported vehicles.  
Havoline® High Mileage
SAE 0W-20, 5W-20, 5W-30, 10W-30
Synthetic blend oils to help extend engine life as mileage increases. 
Havoline® Motor Oil
5W-20, 5W-30, 10W-30
A premium automotive motor oil designed to protects against deposits and wear.
Havoline® ProDS® Euro Full Synthetic Motor Oil 5W-40
Havoline® ProDS® Full Synthetic Euro SAE 5W-40 offers superior formulating technology using select European synthetic base fluids, and its advanced additives system puts Havoline ProDS Full Synthetic Euro in a premium class of engine oils.
Havoline® ProDS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-30, 5W-40, Euro 5W-40, 5W-20, 10W-30
A full synthetic motor oil delivering non-stop protection for today's modern engines.
Havoline® Synthetic Blend Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
A blend of premium synthetic and conventional base oils for better cold temperature performance.
Havoline® Universal Antifreeze/Coolant
Designed for all makes and models of passenger cars and light trucks.
Havoline® Xtended Life Antifreeze/Coolant 
Delivers long-lasting protection for virtually all passenger cars and light trucks. 
Chevron Gear Oil GL-1
90, 140
Chevron Gear Oil GL-1 are rust and oxidation inhibited gear oils that are recommended for many automotive and industrial equipment where the equipment suppliers recommend the use of a straight mineral oil in SAE viscosity grades 90 (ISO 220) or 140 (ISO 460).
Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
On highway heavy duty
Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Hydraulic oils for industrial applications in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Biodegradable hydraulic oils that meet EPA standards for environmentally acceptable marine lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Synthetic hydraulic oils for industrial applications in environmentally sensitive areas.
Delo® 400 SDE SAE 10W-30
10W-30
An API CK-4 heavy duty engine oil specifically formulated for 2017 greenhouse gas (GHG 17) compliant diesel engines designed for lower emissions and improved fuel economy. Fully compatible with previous engines and oil categories.
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.
Delo® 400 SNG
15W-40
Delo® 400 SNG SAE 15W-40 with ISOSYN® Advanced Technology is a premium CNG/LNG oil
Delo® 400 XLE SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines. 
Delo® 400 XLE SAE 15W-40
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 400 ZFA SAE 10W-30
A premium synthetic blend mixed-fleet oil for new-generation  fuel economy engines.
Delo® 600 ADF 10W-30
10W-30
Delo® 600 ADF 10W-30 with OMNIMAX, a Chevron patented technology, is a premium synthetic blend, long drain and mixed-fleet engine oil.
Delo® 600 ADF 15W-40
15W-40
Delo® 600 ADF 15W-40 with OMNIMAX, a Chevron patented technology, is a premium synthetic blend, long drain and mixed-fleet engine oil.
Delo® Gear ESI SAE 80W-90
SAE 80W-90
Premium grade gear lubricant for severe temperature and load conditions. 
Delo® Gear ESI SAE 85W-140
SAE 85W-140
Premium grade lubricants for gearsets exposed to extremely high temperatures and loads.
Delo® Syn ATF HD
Delo® Syn ATF HD is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
For robust protection to hydraulic pumps in mobile and stationary systems.
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
Versatile lubricants for hydraulic pumps and circulating oil systems.
Ursa® Hydraulic Oil
SAE 10W
Ursa® Hydraulic Oil 10W ISOCLEAN® Certified Lubricant is a heavy duty on and off-highway hydraulic oil that is recommended for SAE 10W applications and for equipment with Caterpillar TO-2 requirements.
Chevron ATF HD 389
Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF.
Chevron Hydraulic Oil 5606A
Chevron Hydraulic Oil 5606A is manufactured to be used broadly as a hydraulic medium in automotive and industrial equipment operating in unusually cold conditions such as the Alaska North Slope where conventional hydraulic oils are not suitable.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 SP 0W-30
Delo® 400 SP SAE 0W-30 (Synthetic) is a mixed fleet engine oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines in which an SAE 0W-30 viscosity grade is recommended for cold weather startup and operation.
Delo® 400 XSP SAE 5W-30
A heavy duty engine oil specifically formulated for on-highway applications.
Delo® 400 XSP-FA 5W-30
Delo® 400 XSP-FA 5W-30 is a premium full synthetic fuel-economy and mixed-fleet engine oil
Delo® ELC Antifreeze/Coolant
A versatile engine coolant suitable for a wide range of  on- and off-road applications.
Delo® ELC PG Antifreeze/Coolant
An all-purpose, long-life engine coolant for mixed truck fleets, off-highway and stationary equipment. 
Delo® ELI Corrosion Inhibitor
A water-based, super concentrate inhibitor that protects cooling system metals
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Grease ESI HD EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 3% EP
NLGI grade: 1, 2
Delo® Grease ESI HD Moly 3% EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 5% EP  
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Syn-Gear XDA
75W-85
Delo® Syn-Gear XDA is a premium heavy duty, extreme pressure, multigrade automotive gear lubricant formulated for new generation Daimler axles found on newer model Freightliner and Western Star Trucks.
Delo® Syn-Gear XDM SAE 75W-90
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Gear XDM SAE 80W-140
SAE 80W-140
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Grease SFE EP
NLGI grade: 0
A high-performance, semi-fluid extreme pressure grease for trailer wheel-ends. 
Delo® Syn-Trans HD
SAE 50
A heavy-duty  manual transmission fluid for all-weather, year-round protection and performance.
Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions.
Delo® Syn-Trans XE SAE 75W-90
A heavy duty  synthetic manual transmission fluid for severe service operations.
Delo® Syn-Trans XV SAE 75W-80
A full synthetic fluid for Volvo I-Shift and Mack® mDrive™ automated manual transmissions. 
Delo® XLC Antifreeze/Coolant
An extended-life anti-freeze that provides protection in all the elements. 
Havoline® Conventional Antifreeze/Coolant
Designed for maximum protection in both automotive and heavy-duty diesel engines. 
Havoline® Universal Antifreeze/Coolant
Designed for all makes and models of passenger cars and light trucks.
Havoline® Xtended Life Antifreeze/Coolant 
Delivers long-lasting protection for virtually all passenger cars and light trucks. 
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multi-viscosity lubricant designed to give robust protection to hydraulic pumps.
Ursa® Super Plus
30, 40
A monograde motor oil for use in two and four-cycle gasoline and diesel engines.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Chevron Automatic Transmission Fluid MD-3
10W
Formulated for applications that call for the former DEXRON®-III H, MERCON®, and Allison C-4 fluids.
Chevron Gear Oil GL-1
90, 140
Chevron Gear Oil GL-1 are rust and oxidation inhibited gear oils that are recommended for many automotive and industrial equipment where the equipment suppliers recommend the use of a straight mineral oil in SAE viscosity grades 90 (ISO 220) or 140 (ISO 460).
Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.
Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Rando® WM
ISO 32
Rando® WM 32 ISOCLEAN® Certified Lubricant is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications.
Off highway heavy duty
CETUS® HIPERSYN®
ISO 32,46, 68, 100, 150, 220, 320, 460
Synthetic compressor oils for long-term performance under high temperatures.
Cetus® PAO
ISO 32, 46, 68, 100, 150
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Chevron 1000 THF
A high quality, multifunctional tractor lubricant for various moving parts.
Chevron Synthetic All-Weather THF
Chevron Synthetic All-Weather THF ISOCLEAN® Certified Lubricant is a unique, high quality, multifunctional tractor hydraulic fluid, specially formulated for use in transmissions, final drives, wet brakes, and hydraulic systems of tractors and other equipment employing a common fluid reservoir.
Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Hydraulic oils for industrial applications in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Biodegradable hydraulic oils that meet EPA standards for environmentally acceptable marine lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Synthetic hydraulic oils for industrial applications in environmentally sensitive areas.
Delo® 400 SDE SAE 10W-30
10W-30
An API CK-4 heavy duty engine oil specifically formulated for 2017 greenhouse gas (GHG 17) compliant diesel engines designed for lower emissions and improved fuel economy. Fully compatible with previous engines and oil categories.
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.
Delo® 400 XLE SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines. 
Delo® 400 XLE SAE 15W-40
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 600 ADF 10W-30
10W-30
Delo® 600 ADF 10W-30 with OMNIMAX, a Chevron patented technology, is a premium synthetic blend, long drain and mixed-fleet engine oil.
Delo® 600 ADF 15W-40
15W-40
Delo® 600 ADF 15W-40 with OMNIMAX, a Chevron patented technology, is a premium synthetic blend, long drain and mixed-fleet engine oil.
Delo® Gear ESI SAE 80W-90
SAE 80W-90
Premium grade gear lubricant for severe temperature and load conditions. 
Delo® Gear ESI SAE 85W-140
SAE 85W-140
Premium grade lubricants for gearsets exposed to extremely high temperatures and loads.
Delo® Syn ATF HD
Delo® Syn ATF HD is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Delo® TorqForce
SAE 10W, 30, 50, 60
Delo® TorqForce® products are high performance lubricants designed for use in transmissions, final drives, and hydraulic systems.
Delo® TorqForce FD
SAE 60
Delo® TorqForce® FD SAE 60 is a premium heavy-duty gear lubricant specifically designed for use in final drives and axles of modern Caterpillar off-road equipment operating in severe service, where fluids meeting the Cat FD-1 specification are recommended.
Delo® TorqForce MP
Delo TorqForce MP is a multipurpose lubricant designed for use in transmissions, wet brakes, and hydraulic systems requiring a fluid meeting Caterpillar TO-4 or TO-4M requirements. It can also be used in Komatsu equipment for hydraulic and transmission requirements in cold climate operations.
GST Premium XL
GST Premium XL products are designed to minimize varnish deposits, resist oxidation, and meet the critical demands of today's gas and steam turbines.
GST® 2300
ISO 32, 46
Specially formulated for the demands of large, heavy duty  gas and steam turbines.
GST® Oil
ISO 32, 46, 68, 100
A turbine oil designed to withstand demanding operating conditions.
GST® Premium
ISO 32
A premium oil specially formulated for MHPS turbines.
HDAX 9700
40
HDAX® 9700 is a premium dual fuel gas engine oil.
Meropa®
ISO 68, 100, 150, 220, 320, 460, 680, 1000, 1500
Premium quality extreme pressure gear oils that perform under demanding conditions. 
Meropa® Synthetic EP
ISO 150, 220, 320, 460, 680, 
High quality  EP gear lubricants well suited for most types of industrial gearboxes.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
For robust protection to hydraulic pumps in mobile and stationary systems.
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
Versatile lubricants for hydraulic pumps and circulating oil systems.
Regal® R&O
ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680
Designed to deliver outstanding performance in steam and hydroelectric turbines.
Ursa® Hydraulic Oil
SAE 10W
Ursa® Hydraulic Oil 10W ISOCLEAN® Certified Lubricant is a heavy duty on and off-highway hydraulic oil that is recommended for SAE 10W applications and for equipment with Caterpillar TO-2 requirements.
Aries®
32, 46, 100, 150, 220, 320
Aries® lubricants are designed for use in percussion air tools
Capella® WF
ISO grade 32, 68
Capella® WF oils are designed for use as refrigeration compressor oils.
Cetus® DE
ISO 32, 68, 100, 150
High-quality oils for a variety of portable and stationary compressors.
Cetus® PAO HC
ISO 220
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Chevron ATF HD 389
Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF.
Chevron Cylinder Oil W
ISO 220, 460, 680
Chevron Cylinder Oils W are recommended for lubrication of compressor cylinders and sliding worm gear surfaces in worm drive gear cases.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Chevron Tractor Fluid
SAE 10W
Chevron Tractor Fluid is a universal tractor hydraulic fluid for use in transmissions, final drives, wet brakes, and the hydraulic systems of tractors and other equipment employing a common fluid reservoir.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Clarity® Synthetic EA Gear Oil
ISO 100, 150
Clarity® Synthetic EA Gear Oils are readily biodegradable high performance gear oils that meet EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.
Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 SP 0W-30
Delo® 400 SP SAE 0W-30 (Synthetic) is a mixed fleet engine oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines in which an SAE 0W-30 viscosity grade is recommended for cold weather startup and operation.
Delo® 400 XSP SAE 5W-30
A heavy duty engine oil specifically formulated for on-highway applications.
Delo® 710 LS
SAE 20W-40
Delo® 710 LS products are industry leading, premium diesel engine oils for use in GE and EMD Tier 4 engines in marine, railroad and power generation applications.
Delo® ELC Advanced Antifreeze/Coolant 50/50
Delo ELC Advanced products are the next generation, ethylene glycol-based NOAT (Nitrited Organic Additive Technology) products to provide excellent extended life coolant system protection in diesel, natural gas and CNG engines for both on- and off-road applications. It is available in Premixed 50/50 and concentrate.
Delo® ELC Antifreeze/Coolant
A versatile engine coolant suitable for a wide range of  on- and off-road applications.
Delo® ELC PG Antifreeze/Coolant
An all-purpose, long-life engine coolant for mixed truck fleets, off-highway and stationary equipment. 
Delo® ELI Corrosion Inhibitor
A water-based, super concentrate inhibitor that protects cooling system metals
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Grease ESI HD EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 3% EP
NLGI grade: 1, 2
Delo® Grease ESI HD Moly 3% EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 5% EP  
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Syn-Gear XDM SAE 75W-90
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Gear XDM SAE 80W-140
SAE 80W-140
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Trans HD
SAE 50
A heavy-duty  manual transmission fluid for all-weather, year-round protection and performance.
Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions.
Delo® Syn-Trans XE SAE 75W-90
A heavy duty  synthetic manual transmission fluid for severe service operations.
Delo® XLC Antifreeze/Coolant
An extended-life anti-freeze that provides protection in all the elements. 
GST® 2190 EP
Chevron GST® 2190 EP is formulated for use in circulating oil systems for marine gear turbine sets turbine sizes, weights and operating demands.
Meropa® XL
ISO 68, 150, 220, 320, 460, 680
High performance synthetic blend gear oils for industrial and marine applications.
Multifak® EP
NLGI grade: 000, 00, 0, 1, 2
Multipurpose extreme pressure greases for use in a variety of industrial applications.
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multi-viscosity lubricant designed to give robust protection to hydraulic pumps.
Regal® SGT 22
Regal® SGT 22 is designed for use in modified aviation type gas turbines in non-aviation stationary applications such as in industrial power generation and in marine service.
Ursa® Super Plus
30, 40
A monograde motor oil for use in two and four-cycle gasoline and diesel engines.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Chevron Automatic Transmission Fluid MD-3
10W
Formulated for applications that call for the former DEXRON®-III H, MERCON®, and Allison C-4 fluids.
Chevron Gear Oil GL-1
90, 140
Chevron Gear Oil GL-1 are rust and oxidation inhibited gear oils that are recommended for many automotive and industrial equipment where the equipment suppliers recommend the use of a straight mineral oil in SAE viscosity grades 90 (ISO 220) or 140 (ISO 460).
Chevron HTF P-200
Chevron HTF P-200 is a single phase, silicate free, propylene glycol (USP) based heat transfer fluid concentrate.
Chevron Marine Engine Oil Symbol 9250
SAE 30W, 40, 50
Chevron Marine Engine Oil Symbol 9250 is a high quality, high performance marine engine oil.
Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.
Chevron Red Chain Bar Oils
ISO 68, 100, 150, 220
Chevron's Red Chain Bar Oils are designed for use in chain saws.
Chevron Synthetic Compressor Oil FM
ISO 46
Chevron Synthetic Compressor Oil FM is a synthetic food grade lubricant designed for use in compressors where incidental food contact may occur.
Clarity® Saw Guide Oils
46, 100, 150
Clarity® Saw Guide Oils are designed to lubricate saw blades and guides in saw equipment.
Clarity® Synthetic Machine Oil
ISO grade 150, 220, 320, 460
Clarity® Synthetic Machine Oils are designed for use as EP gear oils and as paper machine oils.
Delo® 1000 Marine
Delo® 1000 Marine is a high-performance, medium-alkaline, diesel engine oil for medium - and high-speed trunk piston diesel engines.
Delo® 710 LE
SAE 20W-40, 40
Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Delo® Syn-Grease SXD 220 Moly 5% EP
NLGI grade: 1
DELO® SYN-GREASE™ SXD 220 is a comprehensive line of greases that are available with or without molybdenum disulfide.
Rando® WM
ISO 32
Rando® WM 32 ISOCLEAN® Certified Lubricant is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications.
Taro® 20 DP
SAE 30(X), 40(X)
Taro® 20 DP are high performance, high alkalinity diesel engine oils for medium and high speed trunk piston diesel engines burning residual fuels with a maximum sulphur content up to 2%. Taro 20 DP can also be used in combination with gas oil or marine diesel oil (MDO).
Taro® 30 DP
SAE 30(X), 40(X)
Taro® 30 DP are high performance, high alkalinity diesel engine oils for medium and high speed trunk piston diesel engines burning residual fuels with a maximum sulfur content up to 4%.
Taro® 40 XL
SAE 40(X)
Taro® 40 XL is a high performance, very high alkalinity diesel engine oil for medium speed trunk piston diesel engines burning residual fuels with a maximum sulfur level of 4.5%.
Taro® 50 XL
SAE 40(X)
Taro® 50 XL is a high performance very high alkalinity diesel engine oil for medium speed trunk piston diesel engines burning residual fuels with a maximum sulfur level of 4.5%.
Taro® Special HT 55
SAE 50
Taro® Special HT 55 is a high performance 55 BN SAE 50 cylinder lubricant intended for lubricating slowspeed engines at high mechanical and thermal loads.
Taro® Special HT 70
SAE 50
Taro® Special HT 70 is a high performance 70 BN SAE 50 cylinder lubricant intended for lubricating slow-speed engines at very high mechanical and thermal loads.
Taro® Special HT LS 40
SAE 50
Taro® Special HT LS 40 is a high performance 40 BN SAE 50 cylinders of the latest generation slow-speed engines using low sulphur fuel and operating at very high mechanical and thermal loads reaching up to 160 bar in maximum cylinder pressure and up to 270 degrees Celsius in liner temperature at top dead center.
Veritas® 800 Marine Oil
30W
Veritas® 800 Marine Oil is a premium crankcase lubricant for slow-speed crosshead diesel engines.
Way Oils Vistac®
68, 220
Way Oils Vistac® are designed for use in the lubrication of slides and ways of machine tools.
Industrial equipment + Machinery
CETUS® HIPERSYN®
ISO 32,46, 68, 100, 150, 220, 320, 460
Synthetic compressor oils for long-term performance under high temperatures.
Cetus® PAO
ISO 32, 46, 68, 100, 150
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Hydraulic oils for industrial applications in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Biodegradable hydraulic oils that meet EPA standards for environmentally acceptable marine lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Synthetic hydraulic oils for industrial applications in environmentally sensitive areas.
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.
Delo® 400 XLE SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines. 
Delo® 400 XLE SAE 15W-40
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 400 ZFA SAE 10W-30
A premium synthetic blend mixed-fleet oil for new-generation  fuel economy engines.
Delo® Gear ESI SAE 80W-90
SAE 80W-90
Premium grade gear lubricant for severe temperature and load conditions. 
Delo® Gear ESI SAE 85W-140
SAE 85W-140
Premium grade lubricants for gearsets exposed to extremely high temperatures and loads.
Delo® Syn ATF HD
Delo® Syn ATF HD is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Delo® TorqForce
SAE 10W, 30, 50, 60
Delo® TorqForce® products are high performance lubricants designed for use in transmissions, final drives, and hydraulic systems.
Delo® TorqForce MP
Delo TorqForce MP is a multipurpose lubricant designed for use in transmissions, wet brakes, and hydraulic systems requiring a fluid meeting Caterpillar TO-4 or TO-4M requirements. It can also be used in Komatsu equipment for hydraulic and transmission requirements in cold climate operations.
GST Premium XL
GST Premium XL products are designed to minimize varnish deposits, resist oxidation, and meet the critical demands of today's gas and steam turbines.
GST® 2300
ISO 32, 46
Specially formulated for the demands of large, heavy duty  gas and steam turbines.
GST® Oil
ISO 32, 46, 68, 100
A turbine oil designed to withstand demanding operating conditions.
GST® Premium
ISO 32
A premium oil specially formulated for MHPS turbines.
HDAX 9700
40
HDAX® 9700 is a premium dual fuel gas engine oil.
Meropa EliteSyn™ XM
150, 220, 320, 460, 680
Meropa EliteSyn™ XM oils are premium high-performance synthetic gear oils
Meropa®
ISO 68, 100, 150, 220, 320, 460, 680, 1000, 1500
Premium quality extreme pressure gear oils that perform under demanding conditions. 
Meropa® Synthetic EP
ISO 150, 220, 320, 460, 680, 
High quality  EP gear lubricants well suited for most types of industrial gearboxes.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
For robust protection to hydraulic pumps in mobile and stationary systems.
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
Versatile lubricants for hydraulic pumps and circulating oil systems.
Regal® R&O
ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680
Designed to deliver outstanding performance in steam and hydroelectric turbines.
Ursa® Hydraulic Oil
SAE 10W
Ursa® Hydraulic Oil 10W ISOCLEAN® Certified Lubricant is a heavy duty on and off-highway hydraulic oil that is recommended for SAE 10W applications and for equipment with Caterpillar TO-2 requirements.
Clarity® Machine Oils
ISO grade 150, 220, 320, 460
Clarity® Hydraulic Oils AW ISOCLEAN® Certified Lubricants are designed to give excellent protection in mobile and stationary hydraulic vane-, piston-, and gear-type pumps and in high-performance industrial applications as well as in environmentally sensitive areas.
Tegra® Synthetic Barrier Fluid
Tegra® Synthetic Barrier Fluid ISOCLEAN® Certified Lubricant is used as a barrier fluid in dual mechanical seals found in pumps handling hydrocarbon liquids.
Aries®
32, 46, 100, 150, 220, 320
Aries® lubricants are designed for use in percussion air tools
Black Pearl® Grease EP
NLGI grade: 1, 2
Multipurpose greases for a variety of automotive and industrial applications.
Capella® WF
ISO grade 32, 68
Capella® WF oils are designed for use as refrigeration compressor oils.
Cetus® DE
ISO 32, 68, 100, 150
High-quality oils for a variety of portable and stationary compressors.
Cetus® EliteSyn NG
68, 100, 150
Cetus EliteSyn NG is a PAG (polyalkylene glycol) based natural gas compressor oil formulated for use in rotary screw and reciprocating compressors.
Cetus® PAO HC
ISO 220
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Chevron ATF HD 389
Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF.
Chevron Cylinder Oil W
ISO 220, 460, 680
Chevron Cylinder Oils W are recommended for lubrication of compressor cylinders and sliding worm gear surfaces in worm drive gear cases.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Chevron SRI Grease
NLGI grade: 2
A high-temperature ball and roller bearing grease.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Chevron VARTECH™ Industrial System Cleaner
Chevron VARTECH™ Industrial System Cleaner is a deposit cleaning product added directly to the oil.
Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 SP 0W-30
Delo® 400 SP SAE 0W-30 (Synthetic) is a mixed fleet engine oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines in which an SAE 0W-30 viscosity grade is recommended for cold weather startup and operation.
Delo® 710 LS
SAE 20W-40
Delo® 710 LS products are industry leading, premium diesel engine oils for use in GE and EMD Tier 4 engines in marine, railroad and power generation applications.
Delo® ELC Advanced Antifreeze/Coolant 50/50
Delo ELC Advanced products are the next generation, ethylene glycol-based NOAT (Nitrited Organic Additive Technology) products to provide excellent extended life coolant system protection in diesel, natural gas and CNG engines for both on- and off-road applications. It is available in Premixed 50/50 and concentrate.
Delo® ELC PG Antifreeze/Coolant
An all-purpose, long-life engine coolant for mixed truck fleets, off-highway and stationary equipment. 
Delo® ELI Corrosion Inhibitor
A water-based, super concentrate inhibitor that protects cooling system metals
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Grease ESI HD EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 3% EP
NLGI grade: 1, 2
Delo® Grease ESI HD Moly 3% EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 5% EP  
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Syn-Gear XDM SAE 75W-90
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Gear XDM SAE 80W-140
SAE 80W-140
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Delo® Syn-Grease SFE EP
NLGI grade: 0
A high-performance, semi-fluid extreme pressure grease for trailer wheel-ends. 
Delo® Syn-Trans HD
SAE 50
A heavy-duty  manual transmission fluid for all-weather, year-round protection and performance.
Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions.
Delo® Syn-Trans XE SAE 75W-90
A heavy duty  synthetic manual transmission fluid for severe service operations.
Delo® Syn-Trans XV SAE 75W-80
A full synthetic fluid for Volvo I-Shift and Mack® mDrive™ automated manual transmissions. 
Delo® XLC Antifreeze/Coolant
An extended-life anti-freeze that provides protection in all the elements. 
GST® 2190 EP
Chevron GST® 2190 EP is formulated for use in circulating oil systems for marine gear turbine sets turbine sizes, weights and operating demands.
HDAX 5200 EF
SAE 40
HDAX® 5200 EF is a premium quality, dispersant/ detergent engine oil.
HDAX® 3100 Ashless Gas Engine Oils
15W-40, 40
HDAX® 3100 Ashless Gas Engine Oils are high performance, bright stock free, ashless, dispersant type natural gas engine oils.
HDAX® 3200 Low Ash Gas Engine Oils
SAE 30W, 40
HDAX 3200 Low Ash Gas Engine Oils are high performance, low ash, dispersant/detergent type engine oils designed to be used primarily in four-stroke stationary engines fueled by natural or synthetic gas.
HDAX® 5100 Ashless Gas Engine Oil
SAE 15W-40, 30, 40
Premium quality ashless oils for natural gas industrial engines.
HDAX® 5200 Low Ash Gas Engine Oils
15W-40, 30, 40
HDAX® 5200 Low Ash Gas Engine Oils are advanced performance, premium quality, bright stock free, low ash, dispersant/detergent type engine oils.
HDAX® 6500 LFG Gas Engine Oil
SAE 40
A low ash oil for landfill and bio gas powered industrial engines.
HDAX® 9200 Low Ash Gas Engine Oil
SAE 40
A low ash, dispersant/detergent type oil for natural gas applications. 
HDAX® PF Antifreeze/Coolant – Premixed 50/50
50/50
HDAX® PF Antifreeze/Coolant - Premixed 50/50 is a single-phase, ethylene glycol based, low silicate coolant/antifreeze designed for use in natural gas engines and in heavy duty on-highway and off-highway diesel engines.
Meropa EliteSyn™ WL
Meropa EliteSyn™ WL 680 is a premium high-performance synthetic gear oil
Meropa® XL
ISO 68, 150, 220, 320, 460, 680
High performance synthetic blend gear oils for industrial and marine applications.
Multifak® EP
NLGI grade: 000, 00, 0, 1, 2
Multipurpose extreme pressure greases for use in a variety of industrial applications.
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multi-viscosity lubricant designed to give robust protection to hydraulic pumps.
Regal® SGT 22
Regal® SGT 22 is designed for use in modified aviation type gas turbines in non-aviation stationary applications such as in industrial power generation and in marine service.
Ursa® Super Plus
30, 40
A monograde motor oil for use in two and four-cycle gasoline and diesel engines.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Bright-Cut® Metalworking Fluid
NHG, NM, AM, AH
Bright-Cut® Metalworking Fluid are chlorine-free cutting oils for use in machining operations.
Canopus®
13, 68
Canopus® oils are designed for use as industrial circulating oils.
Chevron Compressor Oil
ISO 260
Chevron Compressor Oil 260 is used to lubricate compressors in hydrocarbon service.
Chevron Form Oil
ISO 22
Chevron Form Oil has been designed to be used as a concrete form wetting and release oil.
Chevron HTF P-200
Chevron HTF P-200 is a single phase, silicate free, propylene glycol (USP) based heat transfer fluid concentrate.
Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.
Chevron Paper Machine Oil Premium
ISO 150, 220, 320
Chevron Paper Machine Oil Premium oils are paper machine circulating oils designed to give excellent performance in centralized lubrication systems of paper machines.
Chevron Shingle Oil
Chevron Shingle Oil is designed for use on shake roofs, log homes, wood siding, and fences.
Chevron Way Lubricant
ISO 32, 68, 220
Chevron Way Lubricants are designed for use in the lubrication of slides and ways of machine tools.
Clarity® Synthetic Machine Oil
ISO grade 150, 220, 320, 460
Clarity® Synthetic Machine Oils are designed for use as EP gear oils and as paper machine oils.
Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Delo® Syn-Grease SXD 220 Moly 5% EP
NLGI grade: 1
DELO® SYN-GREASE™ SXD 220 is a comprehensive line of greases that are available with or without molybdenum disulfide.
HDAX® 5300 Medium Ash Gas Engine Oil
40
HDAX® 5300 Medium Ash Gas Engine Oil is an advanced performance, premium quality, medium ash, dispersant/detergent type gas engine oil formulated especially for four-stroke engines where medium ash oils are preferred.
Rando® WM
ISO 32
Rando® WM 32 ISOCLEAN® Certified Lubricant is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications.
Way Oils Vistac®
68, 220
Way Oils Vistac® are designed for use in the lubrication of slides and ways of machine tools.