Delivering value for you

Regal SGT 22 delivers value through:

Long service life

Excellent oxidation and thermal stability of the synthetic polyester base fluid and special additive system helps resist oil breakdown under severe, high temperature, high load conditions. The low volatility of the synthetic ester helps minimize evaporative losses.

Minimal maintenance and downtime

Minimal coking tendency of the synthetic ester base fluid and additive system helps minimize deposit formation on bearings and other areas exposed to the heat of the hot gases. High load carrying capacity helps ensure excellent protection against wear. The oil is compatible with normal engine and accessory metallic construction materials and elastomeric sealing compounds.

Excellent all-temperature performance

Excellent viscosity-temperature characteristics of the synthetic ester help promote outstanding low temperature fluidity to facilitate starting at low temperatures, while helping to ensure that an effective lubricant film is always available under the most severe, high temperature conditions to protect critical components against wear.

Applications

Regal SGT 22 has well over 2.5 million fired hours with excellent performance. It is designed for modified aviation-type gas turbines exposed to the most severe operating environment in non-aviation applications such as industrial power generation and marine propulsion.

Regal SGT 22 is approved for:

• U.S. Military Specification MIL-PRF-23699G, Class STD
• General Electric LM Series Aero-derivitive Turbines
• Siemens (Allison) 501K
• Siemens (Rolls Royce) Avon, Olympus, Tyne and Spey models
• Siemens (Rolls Royce) RB 211 Gas Turbines

Regal SGT 22 meets the requirements of:

• Turbomeca Makila TL

Regal SGT 22 is compatible with other lubricants approved under MIL-PRF-23699G. Regal SGT 22 is compatible with metals, paints, coatings and elastomers such as Viton, Teflon, fluorosilicone and Buna N (NBR).

Regal SGT 22 is not to be used in aircraft service. Regal SGT 22 is not recommended for gas turbines that require MIL-PRF-23699F, Class C/I (Corrosion Inhibiting) or HTS (High Thermal Stability).