Engine oils
Industrial oils
Hydraulic oils
Coolants & antifreezes
Greases
Transmission Gear oils
Available with
High-quality lubricants certified to meet OEM cleanliness requirements.
Inland marine equipment

Motor Oils

Delo® 400 XLE SAE 15W-40 (Synthetic Technology)
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 SP 0W-30
Delo® 400 SP SAE 0W-30 (Synthetic) is a mixed fleet engine oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines in which an SAE 0W-30 viscosity grade is recommended for cold weather startup and operation.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Ursa® Super Plus
30, 40
A monograde motor oil for use in two and four-cycle gasoline and diesel engines.

Marine Engine Oils

Delo® 1000 Marine
Delo® 1000 Marine is a high-performance, medium-alkaline, diesel engine oil for medium - and high-speed trunk piston diesel engines.
Chevron Marine Engine Oil Symbol 9250
SAE 30W, 40, 50
Chevron Marine Engine Oil Symbol 9250 is a high quality, high performance marine engine oil.
Veritas® 800 Marine Oil
30W
Veritas® 800 Marine Oil is a premium crankcase lubricant for slow-speed crosshead diesel engines.
Taro® 20 DP
SAE 30(X), 40(X)
Taro® 20 DP are high performance, high alkalinity diesel engine oils for medium and high speed trunk piston diesel engines burning residual fuels with a maximum sulphur content up to 2%. Taro 20 DP can also be used in combination with gas oil or marine diesel oil (MDO).
Taro® 30 DP
SAE 30(X), 40(X)
Taro® 30 DP are high performance, high alkalinity diesel engine oils for medium and high speed trunk piston diesel engines burning residual fuels with a maximum sulfur content up to 4%.
Taro® 40 XL
SAE 40(X)
Taro® 40 XL is a high performance, very high alkalinity diesel engine oil for medium speed trunk piston diesel engines burning residual fuels with a maximum sulfur level of 4.5%.
Taro® 50 XL
SAE 40(X)
Taro® 50 XL is a high performance very high alkalinity diesel engine oil for medium speed trunk piston diesel engines burning residual fuels with a maximum sulfur level of 4.5%.
Taro® Special HT LS 40
SAE 50
Taro® Special HT LS 40 is a high performance 40 BN SAE 50 cylinders of the latest generation slow-speed engines using low sulphur fuel and operating at very high mechanical and thermal loads reaching up to 160 bar in maximum cylinder pressure and up to 270 degrees Celsius in liner temperature at top dead center.
Delo® 710 LE
SAE 20W-40, 40
Delo® 710 LS
SAE 20W-40
Delo® 710 LS products are industry leading, premium diesel engine oils for use in GE and EMD Tier 4 engines in marine, railroad and power generation applications.

Delo Coolants

Delo® ELC Advanced Antifreeze/Coolant 50/50
Delo ELC Advanced products are the next generation, ethylene glycol-based NOAT (Nitrited Organic Additive Technology) products to provide excellent extended life coolant system protection in diesel, natural gas and CNG engines for both on- and off-road applications. It is available in Premixed 50/50 and concentrate.
Delo® ELC Antifreeze/Coolant
A versatile engine coolant suitable for a wide range of  on- and off-road applications.
Delo® ELC PG Antifreeze/Coolant
An all-purpose, long-life engine coolant for mixed truck fleets, off-highway and stationary equipment. 
Delo® ELI Corrosion Inhibitor
A water-based, super concentrate inhibitor that protects cooling system metals
Delo® XLC Antifreeze/Coolant
An extended-life anti-freeze that provides protection in all the elements. 
Chevron HTF P-200
Chevron HTF P-200 is a single phase, silicate free, propylene glycol (USP) based heat transfer fluid concentrate.

Gear Lubricants

Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Meropa®
ISO 68, 100, 150, 220, 320, 460, 680, 1000, 1500
Premium quality extreme pressure gear oils that perform under demanding conditions. 
Meropa® Synthetic EP
ISO 150, 220, 320, 460, 680, 
High quality  EP gear lubricants well suited for most types of industrial gearboxes.
Clarity® Synthetic EA Gear Oil
ISO 100, 150
Clarity® Synthetic EA Gear Oils are readily biodegradable high performance gear oils that meet EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.

Greases

Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Grease ESI HD EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 3% EP
NLGI grade: 1, 2
Delo® Grease ESI HD Moly 3% EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 5% EP  
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Chevron Coupling Grease
NLGI grade: 0/1
Chevron Coupling Grease is specifically designed for the lubrication of high-speed grease lubricated flexible couplings where high centrifugal forces are present.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.
Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
Multifak® EP
NLGI grade: 000, 00, 0, 1, 2
Multipurpose extreme pressure greases for use in a variety of industrial applications.

Hydraulic Oils

Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Designed with ashless technology with an excellent oxidation protection in high-performance industrial applications, as well as in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Readily biodegradable high performance hydraulic oils that deliver maximum protection while meeting EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Ashless Synthetic hydraulic oils for industrial applications in environmentally sensitive areas. These are high viscosity index fluids that provide a wide operating temperature range.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multi-viscosity lubricant designed to give robust protection to hydraulic pumps in Extreme Climates.
Rando® WM
ISO 32
Rando® WM 32 ISOCLEAN® Certified Lubricant is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications. Rando WM 32 offers high level protection and performance under severe operating conditions
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
High Viscosity Index and wide operating temperature lubricant for hydraulic pumps and circulating oil systems.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
High Viscosity Index and wide operating temperature lubricant for hydraulic pumps and circulating oil systems.
Meropa® XL
ISO 68, 150, 220, 320, 460, 680
High performance synthetic blend gear oils for industrial and marine applications.

Compressor Oils

Cetus® DE
ISO 32, 68, 100, 150
High-quality oils for a variety of portable and stationary compressors.
CETUS® HIPERSYN®
ISO 32,46, 68, 100, 150, 220, 320, 460
Synthetic compressor oils for long-term performance under high temperatures.
Cetus® PAO
ISO 32, 46, 68, 100, 150
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Cetus® PAO HC
ISO 220
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Capella® WF
ISO grade 32, 68
Capella® WF oils are designed for use as refrigeration compressor oils.

Turbine Oils

GST® 2190 EP
Tailored for marine turbine applications requiring MIL-PRF-17331
GST® Oil
ISO 32, 46, 68, 100
A long legacy of outstanding oxidation strength and deposit performance for combustion and steam turbines
GST® Premium
ISO 32
Tailored for MHPS CL002 performance
GST Advantage™ RO
ISO 32, 46
Formulated with VARTECH® Technology to resist and disrupt the formation of varnish while maintaining outstanding thermal and oxidative stability.
Regal® R&O
ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680
High quality circulating and turbine oil with diverse compatibility and proven performance
Regal® SGT
ISO 22
Synthetic polyol ester lubricant for aero derivative stationary based turbines

Natrual Gas Engine Oils

HDAX 9700
40
HDAX® 9700 is a premium dual fuel gas engine oil.

Transmission Fluid

Delo® Syn ATF HD
Delo® Syn ATF HD is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.

GST Advantage™ EP
ISO 32, 46
Provides outstanding oxidation stability for long service at elevated temperatures, and includes VARTECH® Technology to resist and disrupt the formation of varnish