I'm looking for
Featured products
OMINIMAX™ Technology - SynBlend
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Improve Engine and After
Treatment System Life:
Extend DPF Cleaning 2.5X
Extended Drain Potential
1.7X*
Improvement Potential
3% ** 4%**
15W-40 CK-4 10W-30 CK-4
Conventional:
Diesel
Lower Carbon:
Renewable Diesel
Natural Gas
Renewable Natural Gas
APPROVED FOR USE IN MIXED DIESEL AND CNG ENGINE FLEETS
ISOSYN Advanced Technology™ - Synthetic
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Maximum Engine Life:
Improve valve train and
piston ring wear protection
Extended Drain Potential
2X*
Improvement Potential
1.6%** 2.3%**
5W-30 CK-4 5W-30 FA-4
Conventional:
Diesel
Gasoline
Low Carbon:
Renewable Diesel
ISOSYN Advanced Technology™ - SynBlend
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Improve Engine Cleanliness:
Increase scuffing resistance
and protection against light
duty power cylinder failure
by reducing LSPI
Extended Drain Potential
1.5X*
Improvement Potential
1.2%** 2%**
10W-30 CK-4 10W-30 FA-4
Conventional:
Diesel
Gasoline
Low Carbon:
Renewable Diesel
ISOSYN Advanced Technology™
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Increase Engine and
Service Life:
Exceptional engine wear and rating for sludge and deposit control
Extended Drain Potential
1.25X*
Low Carbon
Natural Gas
Renewable Natural Gas
*Extended oil drain interval (ODI) potential is based on the average of US Class 8 engine manufacturers’ recommendations. Results will vary depending upon vehicle/equipment type, fuel consumption, maintenance practices, temperature, and variable driving/operating conditions. Consult the engine/vehicle OEM and Chevron before implementing extended ODIs, especially if the engine/vehicle is under warranty.
**Improvement vs. SAE 15W-40 oil in class 8 diesel engine bench testing. Actual savings will vary depending upon vehicle/equipment type, load, temperature, and variable driving/operating conditions.
Filter by
Product Category
Engine oils
Industrial oils
Transmission Gear oils
Equipment Type
Brand
Available with ![]()
High-quality lubricants certified to meet OEM cleanliness requirements.
Motor Oil and Synthetic Motor Oil for Cars
Havoline® PRO-RS™ Renewable Full Synthetic Motor Oil
0W-16, 0W-20, 5W-20, 5W-30
Renewable full synthetic motor oil derived from feedstock that includes 25% sustainably sourced plant-based oils.
Havoline® PRO-DS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-20, 5W-30, 10W-30, 5W-40 and EURO 5W-40
Premium full synthetic motor oil
Havoline® High Mileage Synthetic Technology Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
Premium synthetic technology oil designed for high-mileage vehicles
Havoline® Full Synthetic CVT Fluid
Havoline Full Synthetic CVT Fluid is designed for modern continuously variable transmissions (CVTs), which rely on high steel-on-steel friction between either a belt or chain and pulleys to transfer power.
Engine Oils: Gasoline Fleets
Havoline® PRO-RS™ Renewable Full Synthetic Motor Oil
0W-16, 0W-20, 5W-20, 5W-30
Renewable full synthetic motor oil derived from feedstock that includes 25% sustainably sourced plant-based oils.
Havoline® PRO-DS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-20, 5W-30, 10W-30, 5W-40 and EURO 5W-40
Premium full synthetic motor oil
Havoline® High Mileage Synthetic Technology Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
Premium synthetic technology oil designed for high-mileage vehicles
Havoline® Full Synthetic CVT Fluid
Havoline Full Synthetic CVT Fluid is designed for modern continuously variable transmissions (CVTs), which rely on high steel-on-steel friction between either a belt or chain and pulleys to transfer power.
Delo® 600 ADF 10W-30
ULTRA LOW ASH
Delo® 600® ADF 10W-30 is an ultra low ash heavy duty engine oil recommended for Tier IV Final & 2017 greenhouse gas-compliant, naturally aspirated and turbocharged four-stroke engines, that API CK-4 oils and 10W-30 viscosity grade and mobile NG engines are recommended. This product meets the Detroit Fluid Specification DFS 93K222
Delo® 600 ADF 15W-40
ULTRA LOW ASH
Delo® 600® ADF 10W-30 is an ultra low ash heavy duty engine oil recommended for Tier IV Final & 2017 greenhouse gas-compliant, naturally aspirated and turbocharged four-stroke engines, that API CK-4 oils and 10W-30 viscosity grade and mobile NG engines are recommended. This product meets the Detroit Fluid Specification DFS 93K222
Heavy Duty Engine Oils: On Highway
Havoline® PRO-RS™ Renewable Full Synthetic Motor Oil
0W-16, 0W-20, 5W-20, 5W-30
Renewable full synthetic motor oil derived from feedstock that includes 25% sustainably sourced plant-based oils.
Havoline® PRO-DS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-20, 5W-30, 10W-30, 5W-40 and EURO 5W-40
Premium full synthetic motor oil
Havoline® High Mileage Synthetic Technology Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
Premium synthetic technology oil designed for high-mileage vehicles
Havoline® Full Synthetic CVT Fluid
Havoline Full Synthetic CVT Fluid is designed for modern continuously variable transmissions (CVTs), which rely on high steel-on-steel friction between either a belt or chain and pulleys to transfer power.
Delo 400 XLE SB 15W-40
15W-40
Delo 400 XLE SB SAE 15W-40 is a heavy duty engine oil specifically formulated for on highway applications
Delo® 400 SDE SAE 10W-30
10W-30
A Synthetic Blend API CK-4 heavy duty engine oil formulated for 2017 greenhouse gas compliant diesel engines for lower emissions and improved fuel economy. Fully compatible with previous engines and oil categories. DISCONTINUED: USE DELO 400 XLE 10W-30 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas engines.
DISCONTINUED: USE DELO 400 XLE SB 15W-40 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 SNG
15W-40
Delo® 400 SNG SAE 15W-40 with ISOSYN® Advanced Technology is a premium CNG/LNG oil
Delo® 400 XLE SAE 15W-40 (Synthetic Technology)
A premium synthetic blend, long drain mixed-fleet engine oil for on- and off-highway applications. DISCONTINUED: USE DELO 400 XLE SB 15W-40 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 XSP SAE 5W-30
A heavy duty engine oil specifically formulated for on-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 400 ZFA SAE 10W-30
A premium synthetic blend mixed-fleet oil for new-generation fuel economy engines.
Delo® 600 ADF 10W-30
ULTRA LOW ASH
Delo® 600® ADF 10W-30 is an ultra low ash heavy duty engine oil recommended for Tier IV Final & 2017 greenhouse gas-compliant, naturally aspirated and turbocharged four-stroke engines, that API CK-4 oils and 10W-30 viscosity grade and mobile NG engines are recommended. This product meets the Detroit Fluid Specification DFS 93K222
Delo® 600 ADF 15W-40
ULTRA LOW ASH
Delo® 600® ADF 10W-30 is an ultra low ash heavy duty engine oil recommended for Tier IV Final & 2017 greenhouse gas-compliant, naturally aspirated and turbocharged four-stroke engines, that API CK-4 oils and 10W-30 viscosity grade and mobile NG engines are recommended. This product meets the Detroit Fluid Specification DFS 93K222
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 SP 0W-30
Delo® 400 SP SAE 0W-30 (Synthetic) is a mixed fleet engine oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines in which an SAE 0W-30 viscosity grade is recommended for cold weather startup and operation.
Delo® 400 XLE 10W-30 SynBlend
SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines.
Delo® 400 XSP Full Synthetic Heavy Duty Diesel Motor Oil
15W-40
Delo® 400 XSP 15W-40 is a full synthetic, high-performance engine oil
Ursa® Super Plus
30, 40
A monograde motor oil for use in two and four-cycle gasoline and diesel engines.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Heavy Duty Engine Oils: Off Highway
Havoline® PRO-RS™ Renewable Full Synthetic Motor Oil
0W-16, 0W-20, 5W-20, 5W-30
Renewable full synthetic motor oil derived from feedstock that includes 25% sustainably sourced plant-based oils.
Havoline® PRO-DS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-20, 5W-30, 10W-30, 5W-40 and EURO 5W-40
Premium full synthetic motor oil
Havoline® High Mileage Synthetic Technology Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
Premium synthetic technology oil designed for high-mileage vehicles
Havoline® Full Synthetic CVT Fluid
Havoline Full Synthetic CVT Fluid is designed for modern continuously variable transmissions (CVTs), which rely on high steel-on-steel friction between either a belt or chain and pulleys to transfer power.
Delo® 400 SDE SAE 10W-30
10W-30
A Synthetic Blend API CK-4 heavy duty engine oil formulated for 2017 greenhouse gas compliant diesel engines for lower emissions and improved fuel economy. Fully compatible with previous engines and oil categories. DISCONTINUED: USE DELO 400 XLE 10W-30 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas engines.
DISCONTINUED: USE DELO 400 XLE SB 15W-40 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 XLE SAE 15W-40 (Synthetic Technology)
A premium synthetic blend, long drain mixed-fleet engine oil for on- and off-highway applications. DISCONTINUED: USE DELO 400 XLE SB 15W-40 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 600 ADF 10W-30
ULTRA LOW ASH
Delo® 600® ADF 10W-30 is an ultra low ash heavy duty engine oil recommended for Tier IV Final & 2017 greenhouse gas-compliant, naturally aspirated and turbocharged four-stroke engines, that API CK-4 oils and 10W-30 viscosity grade and mobile NG engines are recommended. This product meets the Detroit Fluid Specification DFS 93K222
Delo® 600 ADF 15W-40
ULTRA LOW ASH
Delo® 600® ADF 10W-30 is an ultra low ash heavy duty engine oil recommended for Tier IV Final & 2017 greenhouse gas-compliant, naturally aspirated and turbocharged four-stroke engines, that API CK-4 oils and 10W-30 viscosity grade and mobile NG engines are recommended. This product meets the Detroit Fluid Specification DFS 93K222
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® 400 XLE 10W-30 SynBlend
SAE 10W-30
A premium synthetic blend mixed-fleet oil formulated for fuel economy in newer engines.
Delo® 400 XSP Full Synthetic Heavy Duty Diesel Motor Oil
15W-40
Delo® 400 XSP 15W-40 is a full synthetic, high-performance engine oil
HDAX® 5100 Ashless Gas Engine Oil
SAE 15W-40, 30, 40
Premium quality ashless oils for natural gas industrial engines.
Ursa® Super Plus
30, 40
A monograde motor oil for use in two and four-cycle gasoline and diesel engines.
Ursa® Super Plus EC
10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Engine Oils: Industrial Machinery
Havoline® PRO-RS™ Renewable Full Synthetic Motor Oil
0W-16, 0W-20, 5W-20, 5W-30
Renewable full synthetic motor oil derived from feedstock that includes 25% sustainably sourced plant-based oils.
Havoline® PRO-DS® Full Synthetic Motor Oil
SAE 0W-16, 0W-20, 5W-20, 5W-30, 10W-30, 5W-40 and EURO 5W-40
Premium full synthetic motor oil
Havoline® High Mileage Synthetic Technology Motor Oil
SAE 0W-20, 5W-20, 5W-30, 10W-30
Premium synthetic technology oil designed for high-mileage vehicles
Havoline® Full Synthetic CVT Fluid
Havoline Full Synthetic CVT Fluid is designed for modern continuously variable transmissions (CVTs), which rely on high steel-on-steel friction between either a belt or chain and pulleys to transfer power.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Meropa EliteSyn™ XM
150, 220, 320, 460, 680
Meropa EliteSyn™ XM oils are premium high-performance synthetic gear oils
Taro® 20 DP
SAE 30(X), 40(X)
Taro® 20 DP are high performance, high alkalinity diesel engine oils for medium and high speed trunk piston diesel engines burning residual fuels with a maximum sulphur content up to 2%. Taro 20 DP can also be used in combination with gas oil or marine diesel oil (MDO).
Chevron Marine Engine Oil Symbol 9250
SAE 30W, 40, 50
Chevron Marine Engine Oil Symbol 9250 is a high
quality, high performance marine engine oil.
Delo® 1000 Marine
Delo® 1000 Marine is a high-performance, medium-alkaline, diesel engine oil for medium - and high-speed trunk piston diesel engines.
Delo® 710 LE
SAE 20W-40, 40
Delo® 710 LS
SAE 20W-40
Delo® 710 LS products are industry leading, premium diesel engine oils for use in GE and EMD Tier 4 engines in marine, railroad and power generation applications.
HDAX® 3100 Ashless Gas Engine Oils
15W-40, 40
HDAX® 3100 Ashless Gas Engine Oils are high performance, bright stock free, ashless, dispersant type natural gas engine oils.
HDAX® 3200 Low Ash Gas Engine Oils
SAE 30W, 40
HDAX 3200 Low Ash Gas Engine Oils are high performance, low ash, dispersant/detergent type engine oils designed to be used primarily in four-stroke stationary engines fueled by natural or synthetic gas.
HDAX® 5100 Ashless Gas Engine Oil
SAE 15W-40, 30, 40
Premium quality ashless oils for natural gas industrial engines.
HDAX® 5200 Low Ash Gas Engine Oils
15W-40, 30, 40
HDAX® 5200 Low Ash Gas Engine Oils are advanced performance, premium quality, bright stock free, low ash, dispersant/detergent type engine oils.
HDAX® 5300 Medium Ash Gas Engine Oil
40
HDAX® 5300 Medium Ash Gas Engine Oil is an advanced performance, premium quality, medium ash, dispersant/detergent type gas engine oil formulated especially for four-stroke engines where medium ash oils are preferred.
TARO® ULTRA 20, 40, 70, 100, 140
SAE 50
For lubricating the cylinders of large low-speed marine diesel engines
Taro® 30 DP
SAE 30(X), 40(X)
Taro® 30 DP are high performance, high alkalinity diesel engine oils for medium and high speed trunk piston diesel engines burning residual fuels with a maximum sulfur content up to 4%.
Taro® 40 XL
SAE 40(X)
Taro® 40 XL is a high performance, very high alkalinity diesel engine oil for medium speed trunk piston diesel engines burning residual fuels with a maximum sulfur level of 4.5%.
Taro® 50 XL
SAE 40(X)
Taro® 50 XL is a high performance very high alkalinity diesel engine oil for medium speed trunk piston diesel engines burning residual fuels with a maximum sulfur level of 4.5%.
Taro® Special HT LS 40
SAE 50
Taro® Special HT LS 40 is a high performance 40 BN SAE 50 cylinders of the latest generation slow-speed engines using low sulphur fuel and operating at very high mechanical and thermal loads reaching up to 160 bar in maximum cylinder pressure and up to 270 degrees Celsius in liner temperature at top dead center.
Veritas® 800 Marine Oil
30W
Veritas® 800 Marine Oil is a premium crankcase lubricant for slow-speed crosshead diesel engines.
